Power Over Ethernet
The CSP-POEINJECTOR will power 1 individual IP camera where power is easily accessible. Our CSP-POEINJECTOR will eliminate the need to place your IP cameras near a power outlet, giving you freedom to run Ethernet cables anywhere! Simply inject the power over the CSP-POEINJECTOR by plugging it into an easily accessible power outlet and send power and video over your cable runs! Also, a very nice tool if you need to extend your IP CAT5 cable over 328 feet so you can continue to deliver both power and video through one Ethernet Cable.
Our Power Over Ethernet PoE Injector comes both a Power Over Ethernet PoE Injector Adapter and a Power Supply. Deliver power to your IP cameras over one CAT5 Cable. Most of our Network Video Recorders have built in POE, so you will simply plug the camera to the back of the NVR - which provides you with both power and video (data) for each camera.
Power over ethernet can be very convenient considering running cable and powering surveillance equipment can be time consuming and expensive. Power over ethernet saves time and money by powering the camera and transmitting video all from one cable. Using a PoE switch or injector with a PoE enabled camera, a security camera installer only needs to run one cable to the camera.
If only one or two cameras will ever be installed, an injector will be cheaper than using a POE Switch. Ethernet cables are composed of 4 small "twisted pairs" of cables that go inside a sheath. On either side there are RJ45 connectors which combine the small cables into the connector. PoE uses one of the pairs to provide electric current which powers the camera.
- 28.8 Watts
- Cispr 22'B', Vcci'B', Fcc'B' Compliant
- Light Weight: 145g
- Efficiency Over 75%
- Over-Voltage Protective Installation
- Short-circuit Protective Installation
- Protection Type: Auto-Recover
- 802.3af Standard
- Operating Temperature 0?C~40?C